DIN2391 High Pressure hydraulic Galvanized Steel Tubing
Detail Produk
DIN2391 High Pressure hydraulic Galvanized Steel Tubing diprodhuksi adhedhasar DIN 2391-C.Iki digunakake kanthi wiyar ing sistem hidrolik, alat mesin, mobil, kapal, mesin konstruksi lan kendaraan.The Hydraulic galvanis tabung baja rapi karo tliti dhuwur wis persil saka kaluwihan: Ora karat sawise 120 jam UJI UJIAN URAIAN;kinerja apik ing Anti Corrosion & Rust;Pipa padhang listrik dilapisi Seng;Werna beda: Putih / Kuning / Warna-warni;Tekanan Tinggi / Ora bocor pipa baja mulus.
Spesifikasi
| Standar | DIN2391 DIN1630 EN10305 DIN2445 JIS G3445 SAE J524 |
| sasmita | ST35/E235 ST37.4 ST45/E255 ST52/E355 |
| Kahanan Pangiriman | NBK(+N) BK(+C) GBK(+A) BKW(+LC) BKS(+SR) |
| Ukuran | OD: 4 nganti 219mm Ketebalan 0.5-35mm, Dawane: 3m,5.8,6 utawa miturut syarat |
| Rampung | lumahing galvanis (Sliver / Kuning / Colorful) lapisan seng saka 8-12um |
| Aplikasi | Sistem Hidrolik;Mobil/bus;kendaraan konstruksi |
| wektu pangiriman | A.3 dina yen apik iki barang Simpenan. B. Kira-kira 30 dina miturut jumlah |
| HYDRAULIC PRECSION STEEL TUBE IN STOCK | ||||||||||
| OD | Ketebalan (mm) | |||||||||
| mm |
| |||||||||
| 4 | 4*1 |
|
|
|
|
|
|
|
|
|
| 6 | 6*1 | 6*1.5 | 6*2 |
|
|
|
|
|
|
|
| 8 | 8*1 | 8*1.5 | 8*2 |
|
|
|
|
|
|
|
| 10 | 10*1 | 10*1.5 | 10*2 | 10*2.5 |
|
|
|
|
|
|
| 12 | 12*1 | 12*1.5 | 12*2 | 12*2.5 | 12*3 |
|
|
|
|
|
| 14 | 14*1 | 14*1.5 | 14*2 | 14*2.5 | 14*3 |
|
|
|
|
|
| 15 | 15*1 | 15*1.5 | 15*2 | 15*2.5 | 15*3 | 15*3.5 |
|
|
|
|
| 16 | 16*1 | 16*1.5 | 16*2 | 16*2.5 | 16*3 | 16*3.5 | 16*4 | 16*4.5 |
|
|
| 18 | 18*1 | 18*1.5 | 18*2 | 18*2.5 | 18*3 | 18*3.5 | 18*4 | 18*4.5 |
|
|
| 20 | 20*1 | 20*1.5 | 20*2 | 20*2.5 | 20*3 | 20*3.5 | 20*4 | 20*4.5 | 20*5 |
|
| 22 | 22*1 | 22*1.5 | 22*2 | 22*2.5 | 22*3 | 22*3.5 | 22*4 | 22*4.5 | 22*5 |
|
| 25 | 25*1 | 25*1.5 | 25*2 | 25*2.5 | 25*3 | 25*3.5 | 25*4 | 25*4.5 | 25*5 |
|
| 28 | 28*1 | 28*1.5 | 28*2 | 28*2.5 | 28*3 | 28*3.5 | 28*4 | 28*4.5 | 28*5 |
|
| 30 | 30*1 | 30*1.5 | 30*2 | 30*2.5 | 30*3 | 30*3.5 | 30*4 | 30*4.5 | 30*5 | 30*6 |
| 32 |
| 32*1.5 | 32*2 | 32*2.5 | 32*3 | 32*3.5 | 32*4 | 32*4.5 | 32*5 | 32*6 |
| 34 |
| 34*1.5 | 34*2 | 34*2.5 | 34*3 | 34*3.5 | 34*4 | 34*4.5 | 34*5 | 34*6 |
| 35 |
| 35*1.5 | 35*2 | 35*2.5 | 35*3 | 35*3.5 | 35*4 | 35*4.5 | 35*5 | 35*6 |
| 38 |
|
| 38*2 | 38*2.5 | 38*3 | 38*3.5 | 38*4 | 38*4.5 | 38*5 | 38*6 |
| 40 |
|
| 40*2 | 40*2.5 | 40*3 | 40*3.5 | 40*4 | 40*4.5 | 40*5 | 40*6 |
| 42 |
|
| 42*2 | 42*2.5 | 42*3 | 42*3.5 | 42*4 | 42*4.5 | 42*5 | 42*6 |
| 45 |
|
| 45*2 | 45*2.5 | 45*3 | 45*3.5 | 45*4 | 45*4.5 | 45*5 | 45*6 |
| 46 |
|
| 46*2 | 46*2.5 | 46*3 | 46*3.5 | 46*4 | 46*4.5 | 46*5 | 46*6 |
| 48 |
|
| 48*2 | 48*2.5 | 48*3 | 48*3.5 | 48*4 | 48*4.5 | 48*5 | 48*6 |
| 50 |
|
| 50*2 | 50*2.5 | 50*3 | 50*3.5 | 50*4 | 50*4.5 | 50*5 | 50*6 |
| 54 |
|
|
| 54*2.5 | 54*3 | 54*3.5 | 54*4 | 54*4.5 | 54*5 | 54*6 |
| 60 |
|
|
| 60*2.5 | 60*3 | 60*3.5 | 60*4 | 60*4.5 | 60*5 | 60*6 |
| 65 |
|
|
|
| 65*3 | 65*3.5 | 65*4 | 65*4.5 | 65*5 | 65*6 |
| 75 |
|
|
|
|
| 75*3.5 | 75*4 | 75*4.5 | 75*5 | 75*6 |
| 76 |
|
|
|
|
|
| 76*4 | 76*4.5 | 76*5 | 76*6 |
| 89 |
|
|
|
|
|
|
|
|
| 89*6 |
| Cathetan: Kita bisa ngasilake ukuran liyane minangka syarat sampeyan.Perawatan lumahing: Padhang, Galvanized, Phosphating etc. | ||||||||||
Komposisi kimia
| Kelas Baja | C | Si | Mn | P | S | Al | |
| jeneng | Ora. | maks | maks | maks | maks | maks | maks |
| E215 | 1.0212 | 0.1 | 0.05 | 0.7 | 0,025 | 0.015 | 0,025 |
| E235 | 1.0308 | 0.17 | 0.35 | 1.2 | 0,025 | 0.015 | — |
| E355 | 1.058 | 0.22 | 0.55 | 1.6 | 0,025 | 0.015 | — |
| ST35 | 1.0308 | 0.17 | 0.35 | 0.4（menit） | 0,025 | 0,025 | — |
| ST45 | 1.0408 | 0.21 | 0.35 | 0.4（menit） | 0,025 | 0,025 | — |
| ST52 | 1.058 | 0.22 | 0.55 | 1.6 | 0,025 | 0,025 | — |
Sifat mekanik
| Kelas Baja | Kekuwatan Ngasilake (Mpa) | Kekuwatan Tarik (Mpa) | Elongasi (%）) | |
| jeneng | Ora. | ReH (min) | Rm (min) | A (min) |
| E215 | 1.0212 | 215 | 290 kanggo 430 | 30 |
| E235 | 1.0308 | 235 | 340 kanggo 480 | 25 |
| E355 | 1.058 | 355 | 490 kanggo 630 | 22 |
| ST35 | 1.0308 | 235 | 340 kanggo 480 | 25 |
| ST45 | 1.0408 | 255 | 440 kanggo 570 | 21 |
| ST52 | 1.058 | 355 | 490 kanggo 630 | 22 |
Toleransi
| OD | Toleransi sing diidini | Toleransi Khusus | ||
|
| GB/T3639 | DIN2391 | OD | WT |
| 4mm-20mm | ± 0,10 mm | ± 0,08 mm | ± 0,05 mm | ± 0,05 mm |
| 20mm-30mm | ± 0,10 mm | ± 0,08 mm | ± 0,08 mm | ± 0,08 mm |
| 31mm-40mm | ± 0,15 mm | ± 0,15 mm | ± 0,10 mm | ± 0,08 mm |
| 41mm-60mm | ± 0,20 mm | ± 0,20 mm | ± 0,15 mm | ± 0,15 mm |
| 61mm-80mm | ± 0,30 mm | ± 0,30 mm | ± 0,20 mm | ± 0,20 mm |
| 81mm-120mm | ± 0,45 mm | ± 0,45 mm | ± 0,30 mm | ± 0,30 mm |
Kahanan Pangiriman
| sebutan | Simbol | Katrangan |
| Dingin rampung (hard) | BK(+C) | Tabung ora ngalami perawatan panas sawise kadhemen pungkasan mbentuk lan, kanthi mangkono, duwe resistance dhuwur kanggo deformasi |
| Dingin rampung (Alus) | BKW | Ing perawatan panas final ngiring dening drawing kadhemen nglibatno deformasi winates.Pangolahan luwih lanjut sing cocog ngidini tingkat kadhemen tartamtu (contone mlengkung, ngembangake) |
| (+LC) | ||
| Kadhemen rampung lan stres-relief | BKS(+SR) | Perawatan panas ditrapake sawise proses pembentukan kadhemen pungkasan.Tunduk ing kahanan pangolahan sing cocog, paningkatan tekanan residual ngidini nggawe lan mesin nganti tingkat tartamtu. |
| Annealed | GBK(+A) | Proses pembentukan Dingin pungkasan diterusake kanthi anil ing atmosfer sing dikontrol. |
| Normalisasi | NBK(+N) | Proses pembentukan kadhemen pungkasan diterusake kanthi anil ing ndhuwur titik transformasi ndhuwur ing atmosfer sing dikontrol. |
Jaminan Mutu
1. Ketat miturut DIN2391 / EN10305 utawa standar liyane.
2. Sample: Sample gratis kanggo tes.
3. Tes: Uji semprotan uyah / Tes Tensile / Eddy saiki / Tes komposisi kimia miturut panyuwunan pelanggan
4. Sertifikat: IATF16949, ISO9001, SGS dll.
5. EN 10204 3.1 Sertifikasi
Aplikasi
Paket produk
